Indicator BUZZER like Pete B...... but for a K.

[w7rren]

I read in Pete B's post that his Sigma car seems to have a buzzer & from replies this may be built into the flasher unit ? if so does anyone know if this is interchangeable with a 2005 K series 7.

I am always forgetting to switch the bl@@by thing off & my dash led don't work !

 

edit to add, Pete -B is there a part number on yours ?

Thanks

 

Born again sevener

1st time around back in 1991

 

Edited by - w7rren on 11 Dec 2007 10:03:10

[Paul Richards]

Try this here

 

Paul Richards

Area Representative - L.A.D.S. (Lancashire and District Sevens)

LADS Website]here

Growing old is compulsory - Growing up is optional

 

Edited by - Paul Richards on 11 Dec 2007 10:08:03

[Eccles]

Hi,

It looks like it is a separate buzzer unit on the Sigma's wiring diagram, much like the circuit above I expect.

 

Ivan

 

[The Pikey]

Although the diagram shows a stand alone buzzer I can't find one in mine and I think its an integral part of the flasher unit.

 

Currently, I am qualified to plead ignorance.

CA08 TRM

[shn7]

My 2001> K chassis wiring loom has the buzzer built into the loom. It's a tiny cylinder about 10mm diameter by 7mm long. Ends up located behind the dash near the tacho/speedo. Hope that helps.

 

Steve.

Sussex (West) AR

Not forgetting Percy the Polar Bear

[w7rren]

Thanks Paul et all , something to have a play with on a wet day !

 

Steve N is your buzzer a standard K fitmant or could a previous owner have fitted it ?

It may be that I have a hidden buzzer that doesn't work ...like my green rev counter indicator led

 

Born again sevener

1st time around back in 1991

 

Edited by - w7rren on 11 Dec 2007 19:44:00

[shn7]

Std part of the loom that I bought new when rebuilding my car. Easily missed even when looking at the loom when it arrived. Very hard to find when fitted to the car if you don't have the scuttle off and even then you could miss it. btw it's black.

 

Steve.

Sussex (West) AR

Not forgetting Percy the Polar Bear