Robert Q Posted May 5, 2002 Share Posted May 5, 2002 I would be very grateful if anyone familiar with the DTA E48 could give me a couple of tips with using it. I have connected mine up to my Vx engine and I think sucessfully loaded in a sample map for this engine which Martin was kind enough to send me. However I am not sure if I connected up the Coils the right way round, so am a bit cautious to check I did it right. There is a TEST POWER CIRCUITS option which I have ran OK, the injectors buz in steps OK. The confusing thing is it just keeps on repeating but does not seem to finish and provide any results to check ? I know I need to set the throttle stops and this looks easy enough, I am just a bit concerned to check the sparking order and the crank sensor. If anyone who's used the system could give me some pointers, I would be very grateful. Thanks in advance for any tips. Robert Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now