gordon wilson Posted April 29, 2002 Share Posted April 29, 2002 My wet sump VX seems to be blowing a lot of oil/vapour out of the breather pipe and coating the underside with a film of oil, while this is good for reducing corrosion I sense it is not as intended - any suggestions please? Gordon Link to comment Share on other sites More sharing options...
I reply to every thread Posted April 29, 2002 Share Posted April 29, 2002 Do a search. I posted on a similar subject about last november. The SBD Cam cover mod cured my problem Link to comment Share on other sites More sharing options...
John_Salmon Posted April 29, 2002 Share Posted April 29, 2002 Try increasing the id of the breather. I run a 19mm breather directly out of the block. Link to comment Share on other sites More sharing options...
I reply to every thread Posted April 29, 2002 Share Posted April 29, 2002 http://www.blatchat.com/Topic.asp?topic_id=9376&forum_id=8&Topic_Title=VX+Wet+Sump+breathing&forum_title=TechTalk Here! Link to comment Share on other sites More sharing options...
gordon wilson Posted April 29, 2002 Author Share Posted April 29, 2002 Aves, Many thanks, Gordon Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now