Mick Day Posted August 31, 2007 Share Posted August 31, 2007 Does anybody know the size of this thread? Link to comment Share on other sites More sharing options...
rj Posted August 31, 2007 Share Posted August 31, 2007 It's M10x1.25 /regin Edited by - RJ on 31 Aug 2007 22:21:15 Link to comment Share on other sites More sharing options...
Mick Day Posted August 31, 2007 Author Share Posted August 31, 2007 Link to comment Share on other sites More sharing options...
Neil Williams Posted August 31, 2007 Share Posted August 31, 2007 Mick, When I fitted the air box to my Jenvey throttle bodies I managed to get a nut to attach the inlet temp sensor from BDM fastenings in Crawley. I just took the sensor in there one lunch time, where they matched it up with a suitable nut straight away. Their address is: B D M Fastenings Royce Rd, Crawley West Sussex, RH10 9NX Tel: 01293 548186 Regards, Neil Link to comment Share on other sites More sharing options...
rj Posted August 31, 2007 Share Posted August 31, 2007 I think I took a nyloc nut and turned it down to being a half nut. I might soon make an alloy nut to shave off the odd gram being a bit of a perfectionist. I have just checked the thread it's M10x1.25 Sorry for the incorrect information Link to comment Share on other sites More sharing options...
Mick Day Posted August 31, 2007 Author Share Posted August 31, 2007 Neil: as I work in Crawley that'll be my 1st port of call this Monday. Regin: thanks for checking. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now