Ian Barkley Posted April 25, 2002 Share Posted April 25, 2002 Can anyone point me to a source of plastic bolts suitable for retaining the rear wings? I asked Caterham am they are looking into supplying them but are not available so far. Thanks Ian Link to comment Share on other sites More sharing options...
Geoff W Posted April 25, 2002 Share Posted April 25, 2002 My car is only just 3 years old and most of the bolts are already very rusty (and I don't drive it in the wet.....sad hey!). I tried to buy some stainless steel jobbies from Caterham but they do not have them. Does anyone know a source for these and are all the bolts/screws the same size all the way round? H7 CAT Link to comment Share on other sites More sharing options...
peterg Posted April 25, 2002 Share Posted April 25, 2002 Try Trident Racing Supplies at Silverstone - very helpful and can get S/steel nuts and bolts, black high tensile bolts and just about anything else 'fasyener' wise...webiste is http://www.tridentracing.co.uk/info/fastcr.htm It's still not fast enough! Link to comment Share on other sites More sharing options...
Andrew Russell Posted April 25, 2002 Share Posted April 25, 2002 Try a search in the archives for this info....Steve Mells souced some recently and had on offer to supply them. Don't know if he has any further surplus though. Andrew Link to comment Share on other sites More sharing options...
tony pashley Posted April 25, 2002 Share Posted April 25, 2002 I think all the ones into rivnuts are M5 x 20mm or thereabouts. for starters you could look here: here they're ok for mail order of that sort of stuff and don't mind small orders. I have some more names somewhere if you need... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now