stephen grant Posted June 22, 2007 Share Posted June 22, 2007 What's a sensible Ampage rating for a replacement battery/FIA switch to solonoid cable? thanks in advance stephen Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted June 22, 2007 Support Team Share Posted June 22, 2007 I've used 27Amp which is the biggest gauge that Halfords sell - it's thicker than the original. Yellow SL #32 Link to comment Share on other sites More sharing options...
Peter Carmichael Posted June 23, 2007 Share Posted June 23, 2007 I think you're talking about a different cable to the one Shaun is talking about. If you are talking about the main connection to carry the starter current, then a 16mm squared cable is fine for short runs, rated at 110 amps (the rating is for continuous use so for short runs it can deliver more current until it heats up). If the cable run length goes up, increase the size. Mostly starting issues are to do with component condition rather than original specification. A 16mm squared cable in good condition will be better than a knackered 25mm squared. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now