EvoDunc Posted May 20, 2007 Share Posted May 20, 2007 I`m going to be changing between full and aeroscreen so need an alternative for the tax disc. Don`t want to drill the bodywork and quite fancy a nice bit of carbon!! Any ideas?? Link to comment Share on other sites More sharing options...
tonyg Posted May 20, 2007 Share Posted May 20, 2007 I bought a carbon tax disc holder from a local bike shop - mounted in one of the bolts that hold the screen in place. Link to comment Share on other sites More sharing options...
Alba 7 Posted May 20, 2007 Share Posted May 20, 2007 Dunc, Mine is on the front nearside bonnet catch (the spring one). It is one of thesehere I had to bend the back plate slightly in the vice to angle it away from the side skin but it is neat and does the job. Yes there is carbon version but you will struggle to bend that one 😬 Link to comment Share on other sites More sharing options...
EvoDunc Posted May 20, 2007 Author Share Posted May 20, 2007 Thanks guys, just "googled" and there are loads!!! Link to comment Share on other sites More sharing options...
Roadsport06 Posted May 20, 2007 Share Posted May 20, 2007 Mine is attached to the rear bolt for the exhaust, no heat damage and out of sight and hopefully out of mind for someone to steel. (Unless they have the allen key to take out the tax disk) BRG and Yellow nose VU06 XZX Link to comment Share on other sites More sharing options...
shn7 Posted May 20, 2007 Share Posted May 20, 2007 Rear exhaust mounting for me too. Disc inserted upside down so it's easier to read without bending down IYSWIM. Steve. Sussex (West) AO Not forgetting Percy the Polar Bear Link to comment Share on other sites More sharing options...
EvoDunc Posted May 20, 2007 Author Share Posted May 20, 2007 Thanks, I know where to get it...............now I know where to put it!!! Link to comment Share on other sites More sharing options...
Johnty Lyons Posted May 20, 2007 Share Posted May 20, 2007 I have two holders both with a bolt hole back plate 1 carries MOT Disc 2 carries Tax Disc They are bolted bach to back either side of the Petty strut hole on the FIA Bar which is at reasonable height and if parked in correct direction, is on the Wardens side of the car. Works for me 😬 jj N.I. L7C AR 🙆🏻 Membership No.3927. Link to comment Share on other sites More sharing options...
Andy A Posted May 21, 2007 Share Posted May 21, 2007 Currently box-taped to the inside of the passenger footwell. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now