jono Posted May 9, 2007 Share Posted May 9, 2007 I've got my newly DVA built 1.8ss on the bench busily re-fitting the ancilliaries with a view to being back on the road end of May Just wondering is it worth putting in a new thermostat, cos it's dead easy or do these tend not to wear out? If so what type of stat would be best suited for a 1.8 ss - I think there may be two types with different trigger temps Cheers Link to comment Share on other sites More sharing options...
prs Posted May 9, 2007 Share Posted May 9, 2007 Jono, FWIW I've put an 82 stat in my 1.8 and the temp remains very stable at around 80c on the move. Injectors all wrapped up ready BTW. Phil S7SVN Link to comment Share on other sites More sharing options...
jono Posted May 9, 2007 Author Share Posted May 9, 2007 Cheers Phil ...just popped your cheque in the post BTW Link to comment Share on other sites More sharing options...
MartinWoodham Posted May 9, 2007 Share Posted May 9, 2007 or stick a PRRT on it - a search will turn up plenty of useful links. Basically PRRT (pressure relief remote thermostat) is easier to get to ie not under the throttle bodies, has a *much* bigger bypass hose, and will open under excess pressure. There's a fairly cheap (£50) freelander kit that's got everything in it. with the caveat that i haven't fitted mine yet, so I shouldn't be talking it up until I've proved it...although several others have! Martin Aero'd supersported ex-Roadsports B...anyone got a cheap LSD? Link to comment Share on other sites More sharing options...
Sheds Moderator Posted May 9, 2007 Share Posted May 9, 2007 If you put a std stat in then drilling a couple of small holes in the thing (esp at the top) will help you bleed the system and prevent thermal shock. (I'm sceptical about the latter). Link to comment Share on other sites More sharing options...
6speedmanual Posted May 9, 2007 Share Posted May 9, 2007 I suggest using a 74 deg C stat. This opens earlier and allows full water flow. The last thing you need is the stat partly closing up on cool days when you are out for a blat. Drilling the stat base plate 4 - 6 holes dia 4mm help flow and bleeding bubbles/airlocks out. 6SpeedManual *tongue*There's no such thing as too much BHP per Ton 😬 Link to comment Share on other sites More sharing options...
davef Posted May 9, 2007 Share Posted May 9, 2007 Um - I had two 4 mm holes in my stat and found this was too much for cold weather - engine didn't really come up to temp at normal road sppeds. I ended up replacing it with a new 82 C stat with a single smaller hole to aid beeding - much quicker warm up (Engine is a R400). Replacing the stat with the engine in the car is a real PITA The PRT looks like a good solution - another alternative is that QED sell a top hose stat kit. Dave Edited by - davef on 9 May 2007 19:16:07 Link to comment Share on other sites More sharing options...
Peter T Posted May 9, 2007 Share Posted May 9, 2007 For the QED one. R500 260 BHP Mango Madness CAR NO-37 Link to comment Share on other sites More sharing options...
7 wonders of the world Posted May 9, 2007 Share Posted May 9, 2007 A 74 degree stat is too cool and is readily used to compensate for failings elsewhere in the cooling system. A more effective solution is to use a PRRT set up this enable the temp to be maintained at 80 degrees and greatly reduces the thermal cycle on the reurn water that the OE set up exposes the engine to. Too young to be old ! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now