Ralph Morgan Posted April 11, 2002 Share Posted April 11, 2002 I am about to start the installation of a Zetec engine in my live axle/4 speed Caterham to replace the ageing Crossflow. Is there anyone in the Swindon area (say, within 30 -45 minutes drive) who has done this and would be prepared to share their experience and show me over their car so that I can avoid any obvious pitfalls? Contacts: home 'phone 01793 762937; office 'phone 01793 452920 or email on morganr4@castrol.com Link to comment Share on other sites More sharing options...
Dave H Posted April 11, 2002 Share Posted April 11, 2002 Ralph, I swapped my crossflow for a Zetec last year. I used the James Whiting conversion kit, and found the whole process quite painless. I am no where near Swindon (Haywards Heath, West Sussex), but am quite happy to discuss it with you. My number is in LF Dave H West Sussex AO Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now