Jason Plato Posted April 23, 2007 Share Posted April 23, 2007 Standard K series Alternator £50 K series Carbon fibre cam cover insert (to suit MS2 / VHPD EU2 cam cover) £20 SOLD Mark Durrant K series clutch cable used 1000mile £10 K series clutch cable unused £15 SOLD 7Wof TW Near side K series engine mount £20 Original fit “Caterham” brand Caerbont 1997 rev counter, black face £30 Pair of 12” x 2.25 x 170lb Faulkner spring unused £25 Pair 10” x 2.25” x 200lb Faulkner springs unused £25 Champion oil filter unused for K series £3 SOLD Carl Francis AP front ventilated discs 15.4mm width – no cracks and not warped £90 (no offers)SOLD jackb_ms Pagid RS15 pads from the above discs 5.5mm thick remaining £15 ( to suit uprated callipers mlb200) K series engine lifting / hoist cradle – attaches to engine and then lift with the hoist – pretty rough condition but works a treat £30 SOLD lionelr K series water by pass temp sensor pipe – relocates your water temp sensors to the by pass pipe under the induction £15 6 speed gearbox input shaft long nose to suit R500 clutch all good £50 Std K series / injection fuel pump (no cradle) £30 Green (18mm) front anti roll bar, with rubber mounts but no balls £15 Mintex 1144 brake pads to suit uprated front calipers (8.5mm remaining ) £15 Mintex 1144 brake pads to suit uprated rear calipers (6mm remaining ) £15 or the whole lot for £250 I'm away on business for a few days now but I'll reply when I get back. Can bring along to fish and chip run, Oulton, Curbuggar sprint...... Dave Edited by - Dave J on 26 Apr 2007 15:57:54 Edited by - Dave J on 26 Apr 2007 15:59:02 Edited by - Dave J on 26 Apr 2007 15:59:43 Edited by - Dave J on 26 Apr 2007 16:00:22 Edited by - Dave J on 27 Apr 2007 08:30:52 Link to comment Share on other sites More sharing options...
Mark Durrant Posted April 23, 2007 Share Posted April 23, 2007 Dave I'll take the carbon fibre cam cover insert and the K series water by pass temp sensor pipe. If you can bring them to Curborough that would be great . Mark D Comp Sec Link to comment Share on other sites More sharing options...
Peter T Posted April 23, 2007 Share Posted April 23, 2007 Dave can i have first dibs on the carbon insert please. R500 260 BHP Mango Madness CAR NO-37 Link to comment Share on other sites More sharing options...
Peter T Posted April 23, 2007 Share Posted April 23, 2007 Bu**er i must type faster!!!!!!!!!!!!!! R500 260 BHP Mango Madness CAR NO-37 Link to comment Share on other sites More sharing options...
TopQ1967 Posted April 23, 2007 Share Posted April 23, 2007 I know I am to late for the CF inserts. But like to know how they look like (do you have a picture)? Q. Link to comment Share on other sites More sharing options...
lrem Posted April 23, 2007 Share Posted April 23, 2007 Hi Dave, I'll take the hoist/cradle please. Cheers Link to comment Share on other sites More sharing options...
Mark Durrant Posted April 23, 2007 Share Posted April 23, 2007 Peter Sorry mate I just pipped you to it Mark D Comp Sec Link to comment Share on other sites More sharing options...
Peter T Posted April 23, 2007 Share Posted April 23, 2007 No worries Mark, i have a new insert being made as we speak. I have done one of the oil filler caps and it looks great. R500 260 BHP Mango Madness CAR NO-37 Link to comment Share on other sites More sharing options...
Dickie Normuss Posted April 23, 2007 Share Posted April 23, 2007 I know Mark Collins (F355GTS) wanted some AP discs a few weeks back VX HPC - Loud and proud here Watch out, whatever hits the fan will not be distributed evenly Link to comment Share on other sites More sharing options...
mav Posted April 23, 2007 Share Posted April 23, 2007 interested in the engine cradle set up Dave Link to comment Share on other sites More sharing options...
henry21p Posted April 23, 2007 Share Posted April 23, 2007 Jack B MS needs a set of AP discs for the front of his car.... Will let him know about these ones Link to comment Share on other sites More sharing options...
henry21p Posted April 23, 2007 Share Posted April 23, 2007 Think i might be interested in the engine cradle setup too given the pending work on my car - How soon do you need it mav, and if i get it, you want it afterwards? (Or you get it and i borrer it 😬) Link to comment Share on other sites More sharing options...
jackb_ms Posted April 23, 2007 Share Posted April 23, 2007 Hi Dave Can I have the disck please? Cheers Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Carl Francis Posted April 23, 2007 Share Posted April 23, 2007 Hi Dave Can I have the oil filter please? cheers Carl Link to comment Share on other sites More sharing options...
Mark Durrant Posted April 26, 2007 Share Posted April 26, 2007 Dave YHM re water temp by pass pipe no longer required. So have a BTT on me Mark D Comp Sec Link to comment Share on other sites More sharing options...
Jason Plato Posted April 26, 2007 Author Share Posted April 26, 2007 *smile*Carl , Jack , Lionelr you have mail Mark - I'll bring it to Curborough Link to comment Share on other sites More sharing options...
FlymoFraser Posted April 26, 2007 Share Posted April 26, 2007 Dave Interested in the tacho if the needle doesn't wave about like a willy in the wind ( as that would be an improvement on my current one. R287 Mobile Jaffa Cake- It's black at both ends with a smashing orangey bit in the middle here Link to comment Share on other sites More sharing options...
Jason Plato Posted April 26, 2007 Author Share Posted April 26, 2007 the tacho needle does wave a bit - but they all do that a bit. I guess it waves like a small willy in a breeze if you need detail Link to comment Share on other sites More sharing options...
CageyH Posted April 26, 2007 Share Posted April 26, 2007 Dave, the temp sender pipe, is it bare? Is this the same as the R500 one? Only dead fish go with the flow....! Link to comment Share on other sites More sharing options...
Jason Plato Posted April 27, 2007 Author Share Posted April 27, 2007 Cagey - yes and yes Link to comment Share on other sites More sharing options...
7 wonders of the world Posted April 27, 2007 Share Posted April 27, 2007 *wavey*Dave, I'll take the new clutch cable please assuming the cable is the same for a 5/6 speed K? Could you bring it to the chippy run?, or if your heading to Stoneleigh on the Sunday? cheers Too young to be old ! Link to comment Share on other sites More sharing options...
Jason Plato Posted April 27, 2007 Author Share Posted April 27, 2007 7WofTW Chippy run Link to comment Share on other sites More sharing options...
jackb_ms Posted April 27, 2007 Share Posted April 27, 2007 Dave Just recieved your e-mail Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now