db Posted April 17, 2007 Share Posted April 17, 2007 Should've written it in my book... My ... Preciousss! Link to comment Share on other sites More sharing options...
mav Posted April 17, 2007 Share Posted April 17, 2007 It's blowing from the rear weld. Link to comment Share on other sites More sharing options...
Area Representative Golf Juliet Tango Posted April 17, 2007 Area Representative Share Posted April 17, 2007 What's wrong with my exhaust? Too many dB? 😬 GJT Crossflow 524 still jumping sideways 😳and ☹️ Link to comment Share on other sites More sharing options...
Delbert Posted April 17, 2007 Share Posted April 17, 2007 Does Db want a new (well to him) Zorst????? If at first you don't succed Sky diving is not for you Link to comment Share on other sites More sharing options...
db Posted April 17, 2007 Author Share Posted April 17, 2007 And is the solution to stop it blowing or do something to the rear weld? My ... Preciousss! Link to comment Share on other sites More sharing options...
Mrs Mav Posted April 18, 2007 Share Posted April 18, 2007 Get the rear welded again Viv Link to comment Share on other sites More sharing options...
db Posted April 18, 2007 Author Share Posted April 18, 2007 Would that work on PD - I think he blows from the rear weld, too. My ... Preciousss! Link to comment Share on other sites More sharing options...
Hibster. Posted April 18, 2007 Share Posted April 18, 2007 Supercheese R250 Caterham pictures here 😬 Link to comment Share on other sites More sharing options...
mav Posted April 18, 2007 Share Posted April 18, 2007 Take it to your local SS welder / exhaust manufacturer and ask then to eld it up and put a tab between the silencer and the tail pipe. - Just as we discussed... Link to comment Share on other sites More sharing options...
Mrs Mav Posted April 18, 2007 Share Posted April 18, 2007 Take PD with you just incase they can do anything to help 😬 Viv Link to comment Share on other sites More sharing options...
db Posted April 18, 2007 Author Share Posted April 18, 2007 Take it to your local SS welder That's where I always fall down on these bits of advice. I know where my local Lambo dealer is, and my local Royal Palace, even my local National Museum, but I haven't the foggiest where the welders live. I'm hoping Mr Whiting might... What's a tab (someone who studied at Cambridge?)? My ... Preciousss! Link to comment Share on other sites More sharing options...
Delbert Posted April 18, 2007 Share Posted April 18, 2007 SS Welder, I thought the Welders were in the Panzer division not the SS 😬 Tab....... ciggerette???? Does Mr Chswick weld bits?????? Why not upgrade to a 421 Zorst add verniers and it changes the engine, really, specially in the mid range If at first you don't succed Sky diving is not for you Edited by - Delbert on 18 Apr 2007 21:52:38 Link to comment Share on other sites More sharing options...
db Posted April 18, 2007 Author Share Posted April 18, 2007 I don't really need my engine changing -- just the way I go round corners. And I'd like the exhaust quieter... My ... Preciousss! Link to comment Share on other sites More sharing options...
mav Posted April 19, 2007 Share Posted April 19, 2007 If you'd only listened when I was telling you... Look up welding services or exhaut Manufacture in yellow pages. The tab I refer to is a piece between the edge of the silencer and the tail pipe. I can't take a picture to show you until the weekend as I'm currently stuck in a DR site near Heathrow... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now