Jump to content
Click here if you are having website access problems ×

Throttle Pot question


Recommended Posts

Having just fitted roller bodies I seem to be facing a problem with the throttle pot calibration in the M3D. Are there different types of throttle pot's? (linear and non linear output). Thing is, my pot's output seems finer towards low throttle settings. At tickover setting the calibration reading on the Emerald is at 630 this then causes problems because the software rejects the range as incorrect.

Is it possible to re-align the map to allow 630=0? Any help would be appreciated as Emerald can't fit me in till the 25th!!

Thanks in advane

 

Andy Marks

VHPD7@aol.com

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...