Bob Corb Posted April 3, 2002 Share Posted April 3, 2002 I've just fitted an Appolo tank to my 2001 car. The new toggle switch supplied (same as the headlamp main/dip switch) to change the temp gauge between displaying oil and water temp has a very thin circular bezel, much smaller than the ones fitted to the rest of the dash and therefore looks out of place. According to Caterham it had to change due to SVA requirements. I only really want a thicker bezel but will purchase any switch fitted with the ~4mm width bezel (for a sensible price / contribution to NTL). Cheers Bob Link to comment Share on other sites More sharing options...
murph7355 Posted April 3, 2002 Share Posted April 3, 2002 Bob Have you had a look here? They have a decent range. One day I'm going to exchange the three toggles I have left for metal ones. Might even sharpen them up a bit to see if the SVA test really has its heart on the right place... Link to comment Share on other sites More sharing options...
Bob Corb Posted April 3, 2002 Author Share Posted April 3, 2002 Thanks Andy, there is one that looks close but in chrome rather than ally. If I dont turn anything else up it may have to do. BC Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now