Jump to content
Click here if you are having website access problems ×

All the necessary bits to make a race car road going


edmandsd

Recommended Posts

I've decided to convert BDR700 for road use and need the following, can anyone help ?

Ali/Carbon rear light blocks and associated lenses/bulbs, reverse/fog lights.

Small carbon backed front lights

Low level carbon passenger seat and harnesses

SVA compliant dash switches and guages

Rear spot calipers/handbrake to suit live axle

Carbon mirrors, side and rear view

 

Many thanks

David

 

07825 122961

david.edmands@virgin.net

 

Home of BDR700

 

Edited by - edmandsd on 19 Mar 2007 10:44:16

 

Edited by - edmandsd on 19 Mar 2007 12:24:36

Link to comment
Share on other sites

standard rockers were ok in 2004, presumably still so, the long flip switches are ok cos they're within however many mm of the steering wheel. if you've fitted the flip switch to swap the water temp gauge over to oil temp, this is too far from a small steering wheel, solution is to remove the switch and replace afterwards...

 

Martin

Aero'd supersported ex-Roadsports B

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...