Firemang Posted March 14, 2007 Share Posted March 14, 2007 Has anyone tried to remove or used a dent removal company to remove a dent from a 7 ali skin? I know it is soft and is easy to work with but on the other hand is eaily streched. Link to comment Share on other sites More sharing options...
Rob Walker Posted March 14, 2007 Share Posted March 14, 2007 DIY, use a teaspoon , cut the handle off it you can then put the end on your finger and roll out any small dent against some flat material place on the other side of the dent. make sure the area is very clean/ free from dust or you will scratch your paintwork. Edited by - Rob Walker on 14 Mar 2007 13:59:51 Link to comment Share on other sites More sharing options...
Stationary M25 Traveller Posted March 14, 2007 Share Posted March 14, 2007 Same for a small dent on the rounded edge of the bonnet ?? Most pushed out gently with thumb against hand on the outside, but a little dent still on top face. ****************** And you run and you run to catch up with the sun, but it's sinking... And racing around to come up behind you again. Link to comment Share on other sites More sharing options...
Firemang Posted March 14, 2007 Author Share Posted March 14, 2007 Hi Rob, Thanks for the tip. Will give it ago. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now