Mike Oxbiggar Posted February 28, 2007 Share Posted February 28, 2007 Can anyone email me a drawing of an approved timing strut for the Seven? Email to Ashbailey(at)AOL.com Thanks and regards The Handbag's tucked up in the garage! Now - where did I leave my sheep? If this is paradise, I wish I had a lawnmower! Link to comment Share on other sites More sharing options...
alan7 Posted February 28, 2007 Share Posted February 28, 2007 Ash, I haven't got a template but try this: MSA Blue Book 10.9.1 "Where timing is activated by a light beam, the vehicles will be fitted at the front with a vertical timing strut, minimum vertical height 254mm, the bottom of which shall not be less than 180mm and no more than 200mm from the ground. The strut shall be matt black on both sides, over its total area, which shall not be less than 254mm by 51mm. No other, or further forward part of the vehicle may interrupt these dimensions or actuate the timing" OR you can buy one from Caterham See you tomorrow night How do you get the dead flies off your teeth....... 😬 R5AAH Link to comment Share on other sites More sharing options...
ECR Posted February 28, 2007 Share Posted February 28, 2007 You should have mail Link to comment Share on other sites More sharing options...
Mike Oxbiggar Posted February 28, 2007 Author Share Posted February 28, 2007 Sirs, Many thanks for your help. Alan - see you tomorrow The Handbag's tucked up in the garage! Now - where did I leave my sheep? If this is paradise, I wish I had a lawnmower! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now