F355GTS Posted March 27, 2002 Share Posted March 27, 2002 Can somebody advise which end is stiff and which is soft, 4 positions available and it's set to position nearest the front of the car Mark Link to comment Share on other sites More sharing options...
tbhall777 Posted March 27, 2002 Share Posted March 27, 2002 That's the stiffest position. Recommend you go to the other end. Use either the first or second hole, nearest the rear of the car. Start with first and test. Link to comment Share on other sites More sharing options...
F355GTS Posted March 27, 2002 Author Share Posted March 27, 2002 Thanks Mark Link to comment Share on other sites More sharing options...
JP Posted March 27, 2002 Share Posted March 27, 2002 Mine were on 1 hole away from the rear when I first got the car. As I gained more confidence I found it had an annoying habit of ready understeer when pushing on at roundabouts etc. Moved it 1 hole forward the 1 away from front and at present it seems much more neutral. Link to comment Share on other sites More sharing options...
stevefoster Posted March 27, 2002 Share Posted March 27, 2002 Mines on 1 from the front. Road and track work. Link to comment Share on other sites More sharing options...
JP Posted March 27, 2002 Share Posted March 27, 2002 Just remembered a previous thread about this subject. Don't forget that there is a lot of fine tuning available as the postion does not have to be the same on each side... James. Link to comment Share on other sites More sharing options...
EFA Posted March 27, 2002 Share Posted March 27, 2002 Remember not all ARB's are the same thickness as well. If you run a 9/16ths on the front position you'll be oversteering everywhere. Entertaining, but slow. Fat Arn Visit the K2 RUM siteid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Link to comment Share on other sites More sharing options...
Alex Wong1697456877 Posted March 28, 2002 Share Posted March 28, 2002 I thought we'd concluded that they should be on the same setting on each side? (Here we go again!) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now