jackb_ms Posted February 20, 2007 Share Posted February 20, 2007 Hello I'm looking for a picture for the back plate for the CC roller barrels for the K serie. Cheers Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Peter T Posted February 22, 2007 Share Posted February 22, 2007 Do you still want a picture? R500 Mango Madness Link to comment Share on other sites More sharing options...
jackb_ms Posted February 22, 2007 Author Share Posted February 22, 2007 Hi Peter The goal has changed abit, I realy need a drawing with dimension on it. Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Peter T Posted February 22, 2007 Share Posted February 22, 2007 Ok, i have mine of the car at the moment, i will sketch it on some paper if you want? R500 Mango Madness Link to comment Share on other sites More sharing options...
jackb_ms Posted February 22, 2007 Author Share Posted February 22, 2007 Thank you Peter What I realy need is the drawing that Titan Motorsport won't release. I need to make a bespoke one to fit in my 21. I will try to give the one I have to a local engineering firm to see if they can make a copy. Anyone insterested it a new back plate? Thanks again for your help Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Peter T Posted February 22, 2007 Share Posted February 22, 2007 What exactly do you need? i can send you a backplate in carbon for exact diminsions. R500 Mango Madness Link to comment Share on other sites More sharing options...
Dickie Normuss Posted February 23, 2007 Share Posted February 23, 2007 Oooh Peter, you tease 😬 VX HPC - Loud and proud here Watch out, whatever hits the fan will not be distributed evenly Link to comment Share on other sites More sharing options...
jackb_ms Posted February 23, 2007 Author Share Posted February 23, 2007 Peter Thank you very much for the offer. I will love to have a carbon back plate. Do you produce them yourself? If yes do you have the CAD drawing for them? My problem is that the original back plate I had with the roller barrels was fouling one of the members inside the engine bay. In R500 the engine is slightly more inclined than normal which mean that the back plate is clear of this member. I cannot do that with my 21 because the exhaust cannot be moved. For the backplate to be fit inside the engine bay, the two elongated onblong holes needs to be reduced by about 50mm on either side. If I had a drawing with all those dimesion I could have one made with the modification without any problem. Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
jackb_ms Posted February 23, 2007 Author Share Posted February 23, 2007 Pete I have just spoken to the company wich I droped the plate last night and they already done it! So I'm ok now, I hope 😳 until the next trial fitting... Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Peter T Posted February 23, 2007 Share Posted February 23, 2007 *thumbup*Ok. R500 Mango Madness Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now