groutledge Posted March 26, 2002 Share Posted March 26, 2002 Does anyone know the rolling circumference of a 6/21/13 ACB10 , I need to set up my bike computer. Ta Graham Link to comment Share on other sites More sharing options...
EFA Posted March 26, 2002 Share Posted March 26, 2002 20.8 inches (528mm) at 20psi Fat Arn Visit the K2 RUM siteid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Link to comment Share on other sites More sharing options...
groutledge Posted March 26, 2002 Author Share Posted March 26, 2002 Cheers Arnie. By the way if you want cheap ACB10/wets/slicks etc try Mark Miller Motorsport on CENSORED He did me 4 part wornm ACB10s for £565 incl vat and delivery. Theres quitre a bit of life left in em too. Graham Edited by - groutledge on 28 Mar 2002 20:01:14 Edited by - groutledge on 28 Mar 2002 20:08:02 Link to comment Share on other sites More sharing options...
F355GTS Posted March 26, 2002 Share Posted March 26, 2002 Arnie 528mm sounds like the diameter not the rolling circumference? would think it would be more like 1600mm Mark Link to comment Share on other sites More sharing options...
rgrigsby Posted March 26, 2002 Share Posted March 26, 2002 1661mm according to the Avon Racing site. Cheers Rob G www.SpeedySeven.com Link to comment Share on other sites More sharing options...
F355GTS Posted March 26, 2002 Share Posted March 26, 2002 61mm out not bad for guess but that's why your the master Rob! Mark Link to comment Share on other sites More sharing options...
EFA Posted March 26, 2002 Share Posted March 26, 2002 Whoops, Skip read! The AVON site does not give the circumference, only dia..... Fat Arn Visit the K2 RUM siteid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Link to comment Share on other sites More sharing options...
F355GTS Posted March 26, 2002 Share Posted March 26, 2002 thinking about it all I had to do was multiply it by pi! 528 x 3.147 =1661 Mark Edited by - F355GTS on 26 Mar 2002 22:25:27 Link to comment Share on other sites More sharing options...
Andrew Dent Posted March 26, 2002 Share Posted March 26, 2002 I bought ACBs from Miller M/S. The 6" ones still had the laquer on them and looked very new. The rest were used but still very road legal. Bargain. Link to comment Share on other sites More sharing options...
Peter Carmichael Posted March 27, 2002 Share Posted March 27, 2002 This message has self-destructed... Edited by - Peter Carmichael on 29 Mar 2002 10:18:19 Link to comment Share on other sites More sharing options...
EFA Posted March 27, 2002 Share Posted March 27, 2002 I just called Mark and told him you circulated the number Peter. How I'm top of his list of people to call when the tyres come in!!!tongue.giftongue.giftongue.gifwink.gif Fat Arn Visit the K2 RUM siteid=red> See the Lotus Seven Club 4 Counties Area Website hereid=green> Edited by - Fat Arnie on 27 Mar 2002 11:37:52 Link to comment Share on other sites More sharing options...
Peter Carmichael Posted March 27, 2002 Share Posted March 27, 2002 Time to rename yourself to "Evil slandering Arnie"question.gif Link to comment Share on other sites More sharing options...
groutledge Posted March 28, 2002 Author Share Posted March 28, 2002 Oops!! I must admit I'd been reluctant to post it for the same reasons, greed. If I swear a lot or mention w*******d and arrowstar perhaps the moderator will close the thread. bugger bugger bugger Please cloe this thread before there's no tyres left!! Graham Link to comment Share on other sites More sharing options...
groutledge Posted March 28, 2002 Author Share Posted March 28, 2002 Ahhh I've just found the little edit message widget. Now we'll have all the ACB10's we can eat and sod the rest :-) By the way Peter Chris Wheeler tells me your interested in Nitrons! Very nice, Very light and probably a bit too good for LA Crossflow. Guy Evans is a jolly nice chap who'll bend over backwards to make you happy ( we'll he did for me anyway! ). The valving can be a bit noisy but I don't think that matters to the likes of you and I. Graham Edited by - groutledge on 28 Mar 2002 20:07:07 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now