FIA roll over bar

[Andy Edwards]

Looking for a low height FIA roll bar to suit 91'ish de dion.

Condition of finish not important - just as long as it's not bent....

 

 

[Richard K]

Hi Andy,

Is you car an 'early' DD If it is and has the top of the suspension bolted through the top of the rear turrets a 'Long Cockpit' L/A should fit.

 

Manxseven has just aquired a L/A Cage and has a standard FIA bar that might be surplus to requirements. See his 'wanted' thread that has just closed.

 

If you need info etc. give me a call on 01277 822407.

Richard

[Andy Edwards]

Hi Richard,

Thanks, but it's a later chassis. Usual horizontal bolt through suspension top - not vertical stud & nut.

Cheers

 

 

[Richard K]

Hi Andy

Rob recently contacted me on the 'tread' when I was looking to buy an FIA bar for my car

See the 'For Sale' L/A FIA Bar and Petty Strut advertised by 'Kipper'. I bought the FIA bar only.

 

He said "If it's any use I'll have an FIA Bar and petty strut for sale from my 1992 Dedion within the next 3-4 weeks, I'm going to be fitting a cage shortly."

Rob G

www.SpeedySeven.com

 

This was posed about 2-3 weeks ago now. It might be worth contacting him (located in Kent)

 

Best of luck Richard

 

[Andy Edwards]

Thanks Richard, I'll him a look.

 

 

[Andy Edwards]

even give him a look...