bertie Posted January 31, 2007 Share Posted January 31, 2007 As per the thread title, anyone recommend anywhere near Derby that could fit and time in correctly a pair of vernier puleys on my R400? Also, what cams are in the R400? Presume you need to tell them so they can time them properly. Cheers Link to comment Share on other sites More sharing options...
Bozz Posted January 31, 2007 Share Posted January 31, 2007 Milton Keynes isn't far away from Derby is it  Bozz  McLaren Orange and Black 1.6SS 6 Speed here Link to comment Share on other sites More sharing options...
Delberts Wallet Posted January 31, 2007 Share Posted January 31, 2007 Rob, I could fit them but not able to time them. Not much help really. Sold the Lambo yet? Gareth Blue and Carbon 6 Speed 1.8 Supersport here Link to comment Share on other sites More sharing options...
neilg Posted January 31, 2007 Share Posted January 31, 2007 Try QED nr Loughborough or Power Train Products who did my verniers on my 1.6k conversion. They aren't far away. They know all about k series . Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted January 31, 2007 Area Representative Share Posted January 31, 2007 Bertie, Is Stoke (well, Newcastle actually) close enough? Unlike Gareth, who can only fit them, I could fit and time them. I've done a few now. Have you got the verniers? Did you just want the job done, or did you want to be a part of the proccess? I understand the R400 cams are standard VHPD cams. If so, I've got a record somewhere of what I set a set of these to a while ago. I'll look it out.  Link to comment Share on other sites More sharing options...
oilyhands Posted January 31, 2007 Share Posted January 31, 2007 130 thou LATDC inlet, 115 thou LATDC exhaust. Oily Link to comment Share on other sites More sharing options...
Sandy Posted February 1, 2007 Share Posted February 1, 2007 I heard that Richard Link to comment Share on other sites More sharing options...
Area Representative Richard Price Posted February 1, 2007 Area Representative Share Posted February 1, 2007 Sandy, Link to comment Share on other sites More sharing options...
Delberts Wallet Posted February 1, 2007 Share Posted February 1, 2007 Richard, Fancy doing mine for me then? No doubt Sandy will try and jump on the back of this too as he want to check his timing on the SLR. Link to comment Share on other sites More sharing options...
bertie Posted February 1, 2007 Author Share Posted February 1, 2007 So basicly it's all round to Richards for a vernier setting evening then!!! Seriously, I might well take you up on that offer Richard, might just have a word with Dave Andrews to see how much it would be to supply and fit a set, plus the likely benefits and the possobility of tweaking the MBE ECU. Thanks chaps. Link to comment Share on other sites More sharing options...
bertie Posted February 1, 2007 Author Share Posted February 1, 2007 Gareth, no the Lambo is still very much in residence. I did have a wobble and think I ought to be more sensible, but I'm over it now!! Three 2 seaters currently......let the madness continue. Link to comment Share on other sites More sharing options...
nickh7 Posted February 1, 2007 Share Posted February 1, 2007 try full throtle racing Based near B'ham ex MG motorsport people  here Buts as its already been said MKs not that far Nick h Its Yellow And Black and Makes me 😬here Link to comment Share on other sites More sharing options...
Area Representative Nick Chan Posted February 1, 2007 Area Representative Share Posted February 1, 2007 I'd use the Caterham Westlands service department - in joke, for Richard's helpful abilities  As he says there have been a few cars round there that have been sorted Link to comment Share on other sites More sharing options...
Englishmaninwales Posted February 3, 2007 Share Posted February 3, 2007 I can recommend the Richard Price garage *thumbup* You might even get a glimpse of his sprint/hillclimb trophy cabinet 😬 😬 BUT don't leave your spag bol lunch unattended as his dog is VERY hungry Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now