jackb_ms Posted January 30, 2007 Share Posted January 30, 2007 Hi I should be fitting my new roller barrels this weekend. Before I start, Have you got advice in fitting a set? Cheers Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
rj Posted January 30, 2007 Share Posted January 30, 2007 Remove the old induction system before atempting to fit the RB's Otherwise it won't work Link to comment Share on other sites More sharing options...
jackb_ms Posted January 30, 2007 Author Share Posted January 30, 2007 really! 😳 Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
Ash.Bailey Posted January 30, 2007 Share Posted January 30, 2007 if the fuel rail nuts are stuck - dont get the blow torch out If It aint yellow, wonky and wobbly................ 😬 Link to comment Share on other sites More sharing options...
Leadership Team SLR No.77 Posted January 30, 2007 Leadership Team Share Posted January 30, 2007 .... and if you're really struggling I'll have them 😬 Stu. Link to comment Share on other sites More sharing options...
rj Posted January 30, 2007 Share Posted January 30, 2007 Slightly more serious mode: It's straightforward... Link to comment Share on other sites More sharing options...
Peter T Posted January 30, 2007 Share Posted January 30, 2007 But does have some bends Are they the Titan versions? R500 Mango Madness Link to comment Share on other sites More sharing options...
jackb_ms Posted January 30, 2007 Author Share Posted January 30, 2007 yes they are the titan's Very pretty piece of kit Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
DSL Posted January 30, 2007 Share Posted January 30, 2007 If they are near to hand, would you do me a favour & let me know how long the standard alloy trumpet's are please, & the internal length of the roller barrel itself Link to comment Share on other sites More sharing options...
jackb_ms Posted January 30, 2007 Author Share Posted January 30, 2007 the trumpets are 42mm from the base plate, rougly measured with my ruler. What do you ,ean by internal lenght? Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
oilyhands Posted January 30, 2007 Share Posted January 30, 2007 The runner diameters at the manifold face are unlikely to match the inlet port on the head and there are some nasty steps some 6 or so mm back from the flange that you may wish to eradicate. correct loaction alos relies on the use of stepped studs that are fitted to all heads that utilise the RTBs, you may not have these. Oily Link to comment Share on other sites More sharing options...
jackb_ms Posted January 30, 2007 Author Share Posted January 30, 2007 Oily Thanks for the brief explanation. Do you have picture or diagram which will illustrate what you explained? Cheers Jack Emily, The Very Yellow 21 Link to comment Share on other sites More sharing options...
oilyhands Posted January 30, 2007 Share Posted January 30, 2007 No, sorry, just use your eyes 😬 and all will be revealed. Oily Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now