Big Brother Posted March 18, 2002 Share Posted March 18, 2002 I am toying with the idea of sprinting my early series 3 Caterham seven. One of the requirements for scrutineering is to have a fireproof bulkhead between the cockpit and the engine bay. This is a problem with early cars as the pedals were not enclosed as they are on modern cars. I have been told that a couple of years ago Low flying ran an article explaining how to overcome this problem and box in the pedals. If anybody has this article, could they please scan me a copy. I have no idea of the exact date, only that it was a "while ago". Also if anyone reading this has an early car with this mod carried out, can they drop me a line please. Cheers Steve www.Se7en-Up.co.uk id=green> Link to comment Share on other sites More sharing options...
philwaters Posted March 19, 2002 Share Posted March 19, 2002 Hi Steve, I have all the mags back to 96 so I will try and find it - I seem to remember it. Shall I mail you a scanned image or bring a photocopy to the next meet? Phil Waters Zetec is in and running wink.gif Link to comment Share on other sites More sharing options...
greg Posted March 19, 2002 Share Posted March 19, 2002 Phil, Can you scan it, and email me a copy ? Greg, Q 880 RAE (Green/Ali XF) Link to comment Share on other sites More sharing options...
Big Brother Posted March 19, 2002 Author Share Posted March 19, 2002 Phil, If you can scan and mail it, that would be great. I can then print a copy to take over the garage and make plans...... Steve www.Se7en-Up.co.uk id=green> Edited by - steve motts on 19 Mar 2002 09:11:51 Link to comment Share on other sites More sharing options...
I.Mupferit Posted March 19, 2002 Share Posted March 19, 2002 Steve, Let me know if you want a piece of Aluminium for the footbox. Brent Link to comment Share on other sites More sharing options...
Big Brother Posted March 19, 2002 Author Share Posted March 19, 2002 Will do Brent...I'm making a list smile.gif I still need to work out the size of the piece for behind the seats. Was it you who bibbed and waved at me in Fleet on Sunday? I had just pulled into the tyre fitters carpark and my goggles had misted up. Through the mist I saw a Green Seven with someone waving as they drove off towards Aldershot. Steve www.Se7en-Up.co.uk id=green> Link to comment Share on other sites More sharing options...
philwaters Posted March 19, 2002 Share Posted March 19, 2002 Steve & Greg, Will have a route through the old mags tonight and will scan it in tomorrow here at work. Any limits on file size/dpi? Phil Waters Zetec is in and running wink.gif Link to comment Share on other sites More sharing options...
greg Posted March 19, 2002 Share Posted March 19, 2002 If its much over 1 meg please let me know. Otherwise no. Thanks, Greg, Q 880 RAE (Green/Ali XF) Link to comment Share on other sites More sharing options...
Big Brother Posted March 19, 2002 Author Share Posted March 19, 2002 Phil, Any dpi will do, just as long as its readable. JPEG if poss, to keep the file size down (not sure what the limit on mailbox size is for my ISP) Cheers Steve www.Se7en-Up.co.uk id=green> Link to comment Share on other sites More sharing options...
I.Mupferit Posted March 19, 2002 Share Posted March 19, 2002 Steve, No not me, didn't go out in it last weekend - too bloody wet & windy! I'm not as hardy as you young lads. Brent Link to comment Share on other sites More sharing options...
philwaters Posted March 20, 2002 Share Posted March 20, 2002 ok guys, sent out this morning. File was about 750kb in the end I think and was easy to read on my machine, but wasn't very technical. If you need to measure a car Steve (and if you are near Bracknell Greg) you are welcome to come over for a look. Hi Brent, would you believe my car still hasn't hit the ground in anger yet! I did lower it onto the wheels Monday night and BLIMY I'd forgotten how low our cars are (used to mine being 3ft up in the air the last 4 months). It's a long and depressing story sad.gif Phil Waters Zetec is in and running wink.gif Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now