Mark Durrant Posted January 2, 2007 Share Posted January 2, 2007 Race Technology 12v Battery Conditioner - £20 - Sold to Mike C Clarke Parts Washer CW2D (used once) - £25 - Sold to Chris Hawkins Watts Linkage - £70 - Sold to Stuart Faulds Alloy (alluminium finish) Aero Filler for injection - £50 - Sold to Aves EU2 Supersport ECU (no plippers) - £50 - Sold to Thomas Rosselle Quaife Type 9 Quickshift - £45 - Sold to Nifty Magnecore Ignition Leads for EU2 K series (new last year) - £45 - Sold to Bozz Red and Green Front ARB's (widetrack) - £15 each - Sold to Colin Powell Rear Orange ARB (over diff) - £15 Spare Wheeel Yokes x 2 £10 each All plus postage and can deliver to the Autosport Show on the Friday. Either post your interest on here or drop an email to my profile. Mark D Comp Sec Edited by - mark durrant on 3 Jan 2007 08:43:13 Edited by - mark durrant on 3 Jan 2007 12:00:19 Edited by - mark durrant on 3 Jan 2007 12:04:26 Edited by - mark durrant on 3 Jan 2007 13:19:14 Edited by - mark durrant on 4 Jan 2007 11:35:06 Edited by - mark durrant on 4 Jan 2007 14:56:04 Edited by - mark durrant on 4 Jan 2007 15:04:55 Link to comment Share on other sites More sharing options...
Little Bob Posted January 2, 2007 Share Posted January 2, 2007 Mark - interested in the battery conditioner, I presume this is one that is simply left connected to the battery over periods of non use to maintain the charge? Do you have any pictures? Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 2, 2007 Author Share Posted January 2, 2007 Littlebob Yes you are correct. I can email you a picture tomorrow if you send me a Blatmail. Mark D Comp Sec Link to comment Share on other sites More sharing options...
Little Bob Posted January 2, 2007 Share Posted January 2, 2007 Mark - that would be great, YHM. Link to comment Share on other sites More sharing options...
Colin Powell Posted January 2, 2007 Share Posted January 2, 2007 Could i take the front anti roll bars please I have sent you mail Go on then just one more Edited by - Colin Powell on 2 Jan 2007 22:20:24 Link to comment Share on other sites More sharing options...
Wile7 Posted January 2, 2007 Share Posted January 2, 2007 Quaife Type 9 Quickshirt I know I am a bit of a numpty but how many times do I need to wear the 'Quickshirt' to maximise the full potential of my crossflow please Mark 🤔 Sorry....... 😬 Dave Ardley. White Xflow with Clams Don't point that beard at me, it might go off. Groucho Marx Updated photos here Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 3, 2007 Author Share Posted January 3, 2007 Colin The front ARB's are yours and I will pick up your email later Dave Pleased you spotted the deliberate spelling mistake 😬 Mark D Comp Sec Link to comment Share on other sites More sharing options...
ChrisHawkins Posted January 3, 2007 Share Posted January 3, 2007 Mark, YHM re parts washer Chris K93 AMJ Link to comment Share on other sites More sharing options...
Airhog Posted January 3, 2007 Share Posted January 3, 2007 Hi Mark Is the aero filler alloy or black? also is it for injection cars? Cheers Link to comment Share on other sites More sharing options...
I reply to every thread Posted January 3, 2007 Share Posted January 3, 2007 First dibs on the aero cap if airhog doesn't want it (on behalf of a mate) Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 3, 2007 Author Share Posted January 3, 2007 Chris YHM Airhog The filler cap has an alluminium finish and is for injection. Mark D Comp Sec Link to comment Share on other sites More sharing options...
Nifty Posted January 3, 2007 Share Posted January 3, 2007 Mark, YHM regarding the quickshirt Nifty Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Nifty Posted January 3, 2007 Share Posted January 3, 2007 YHmoreM Mark Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
I reply to every thread Posted January 3, 2007 Share Posted January 3, 2007 Airhog - could you post whether you're stll interested in the aero cap please Link to comment Share on other sites More sharing options...
Mike C Posted January 3, 2007 Share Posted January 3, 2007 Mark, Second dibs on the hair conditioner please 😬 07770 968944 Mike C K9 JPE Link to comment Share on other sites More sharing options...
Miura Posted January 3, 2007 Share Posted January 3, 2007 Mark, First dibs on the ECU please on behalf of a French owner will confirm ASAP Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 3, 2007 Author Share Posted January 3, 2007 Mike You have second dibs but note it is a conditioner not restorer 😬 Muira No problem Mark D Comp Sec Link to comment Share on other sites More sharing options...
Stuart Faulds Posted January 3, 2007 Share Posted January 3, 2007 If the watts linkage is in good condition (ie. negligable play in the sphericals) and complete I'll take it Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 4, 2007 Author Share Posted January 4, 2007 Mike C The conditioner is yours and I will call you later today as I am in meetings most of the morning. Stuart The Watts linkage is complete and comes from an R500 that had covered just 6k road miles. I will check the sphericals for play tonight but from memory they are OK Mark D Comp Sec Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 4, 2007 Author Share Posted January 4, 2007 Aves If Airhog has not replied by lunchtime (13:00hrs) the aero filler cap is yours Mark D Comp Sec Link to comment Share on other sites More sharing options...
ben7 Posted January 4, 2007 Share Posted January 4, 2007 Mark, YHM re Watts Linkage ... Edited to add that I missed Stuart's post. Second dibs please. Ben Edited by - V500OSV on 4 Jan 2007 09:17:22 Link to comment Share on other sites More sharing options...
I reply to every thread Posted January 4, 2007 Share Posted January 4, 2007 Out of interest - what is the difference between a carb filler & an injection one? A return from the fuel rail? Link to comment Share on other sites More sharing options...
Miura Posted January 4, 2007 Share Posted January 4, 2007 Mark YHM to confirm transaction Link to comment Share on other sites More sharing options...
Mark Durrant Posted January 4, 2007 Author Share Posted January 4, 2007 Aves Sorry I do not know the difference between the injection and carb version. I am selling the cap only and it uses the existing filler neck. Miura I have sent a reply to Thomas in response to his email Mark D Comp Sec Link to comment Share on other sites More sharing options...
I reply to every thread Posted January 4, 2007 Share Posted January 4, 2007 Ah - what does it look like? We only actually need the cap. Is one of the standard caterham ones? Lift the flap or bike lock? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now