cookie7 Posted March 17, 2002 Share Posted March 17, 2002 6 speed box 41,000 mls little bit of play on the in put shaft.how hard is it to change the bearing.grateful for any in put Link to comment Share on other sites More sharing options...
Paul Ranson Posted March 17, 2002 Share Posted March 17, 2002 I'd not be at all surprised if 'they all do that sir'. But 'Phil Stewart at Road Race Transmissions 01959 5251125' would confirm matters. (search the archive for him) Paul Link to comment Share on other sites More sharing options...
Rob Walker Posted March 18, 2002 Share Posted March 18, 2002 When you say play I presume that this is up and down and side to side, if so this is normal as the shaft needs to be supported in the crankshaft end by the spigot bearing, if you look there should be a small needle roller bearing in the end of the crank for this purpose . If the play is longtitudally in and out then this is not normal and needs further investigation. Link to comment Share on other sites More sharing options...
cookie7 Posted March 18, 2002 Author Share Posted March 18, 2002 Thanks lads i seem to have the right type of movement.ILL be able to have some sleep tonight. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now