hugh Posted March 11, 2002 Share Posted March 11, 2002 i have a micro dynamics rev limiter which i took off my old rally car and i want to fit to my crossflow engined caterham the problem is, i never recorded how i wired it up before, its the basic type of micro dynamics rev limiter. can anybody help me on how this rev limiter should be wired up. Link to comment Share on other sites More sharing options...
philwaters Posted March 12, 2002 Share Posted March 12, 2002 Hi Hugh, I had a Microdynamics limiter on my X/flow. I have sold it on now so I can not check the wiring layout, but it should be marked on the unit. I think the middle connection was earth, but am not 100% sure. The other two then piggy back onto the ignition coil (negative and positive connection specific). Anyone out there who can have a look on one? Phil Waters Zetec is in and running wink.gif Link to comment Share on other sites More sharing options...
Graham Sewell Posted March 12, 2002 Share Posted March 12, 2002 Try calling Mark at Ratrace (020 8216 5567), he has my car for a rebuild! Cheers, Graham Low tech luddite - xflow and proud! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now