Slider7 Posted November 20, 2006 Share Posted November 20, 2006 Nothing to do with me ... here Nice detailing ... but IMHO a 'bit' expensive 😳 Link to comment Share on other sites More sharing options...
Gambo Posted November 20, 2006 Share Posted November 20, 2006 I wouldn't give you £50. It's been Devalued by the use of Clams. *tongue* RED 2.0 HPC 230BHP Link to comment Share on other sites More sharing options...
Mike Oxbiggar Posted November 20, 2006 Share Posted November 20, 2006 But at least it's not white I suppose... K16 00C - Bailey's MANGO Handbag (No bloody dots!) Link to comment Share on other sites More sharing options...
Jason Plato Posted November 20, 2006 Share Posted November 20, 2006 I have one of those ! Its was free with a magazine subscription a few years ago . The only difference is the plaque underneath ! ebay scamster 🤔 🤔 🤔 here is C7 TOP South Wales AO Link to comment Share on other sites More sharing options...
Petrolhead Posted November 20, 2006 Share Posted November 20, 2006 £500!!!!!!!!!!!!!!!! NE7Club Web Site R5 no 65 😬 Link to comment Share on other sites More sharing options...
Slider7 Posted November 20, 2006 Author Share Posted November 20, 2006 Its was free with a magazine subscription a few years ago . 😳 ... and now they're asking £500 🙆🏻 Link to comment Share on other sites More sharing options...
CHRIS CLARK Posted November 20, 2006 Share Posted November 20, 2006 Nice model (and nicer still BECAUSE of the Clamshells ) but 500UKP? Errr, no! Clamshell Club Founder Member. Link to comment Share on other sites More sharing options...
Wile7 Posted November 21, 2006 Share Posted November 21, 2006 Dave Ardley. White Xflow with Clams Don't point that beard at me, it might go off. Groucho Marx Updated photos here Link to comment Share on other sites More sharing options...
Budjuggler Posted November 21, 2006 Share Posted November 21, 2006 How much???????????????????????? It's a toy FFS Whoops - there goes another one Link to comment Share on other sites More sharing options...
fastlady Posted November 21, 2006 Share Posted November 21, 2006 Actually some hand built scale models do genuinely reach those sorts of prices! Have a look here or here (1:43 scale, amazingly!) for example. Stephen Barnett's models sell for several thousands of pounds - but then they are one-offs and the sheer amount and quality of work put into them justify the price completely. However this one definitely isn't one of those.... it looks die cast and at 1:20 scale even if it was as detailed and well made as the CMC models are (some of the best die casts I've seen) it wouldn't be more than £150-£175 at most. He's just havin' a larf!!! Link to comment Share on other sites More sharing options...
andy couchman Posted November 21, 2006 Share Posted November 21, 2006 The detail on things like carbs and seat belts looks very good compared to the popular and outwardly similar Kyosho model (less than £50 IIRC). It's also modelled on quite an old car - certainly pre-1988 judging by the wing stays (switches off anorak mode). Lot of dosh tho... Andy Link to comment Share on other sites More sharing options...
K12 KAR Posted November 22, 2006 Share Posted November 22, 2006 Well to be fait it's cheap compared to the Bentley model lower down the page. £10,000 *eek* ************************** Prisoner No. 5 2.0 l Vauxhall Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now