John Howe Posted March 11, 2002 Share Posted March 11, 2002 Hoping to save other, who like me didn't know... When fitting a steel crank, do check that the crank recess that takes the end of the gearbox shaft is deep enough! I found out the hard way by having to remove the engine again... simple measuring is required, then take (that trusty of all lightening aids) the angle grinder and cut the excess off. In my case its was about 25mm. JH Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now