graham bass Posted November 13, 2006 Share Posted November 13, 2006 I have for sale: Alloy rocker cover for dry sump x-flow painted black - £15.00 Set of 4 conrods for x-flow all good and were balanced as part of the original engine (not narrow journal) - £35.00 Microdynamics rev limiter - £30.00 Rev counter 80mm (I think VDO) 0-7000RPM - £15 Standard 1600cc FF x-flow cylinder head complete with valves and single springs good condition - £50 All above plus postage, though cylinder head may be expensive to post? Thanks for looking. Graham Link to comment Share on other sites More sharing options...
Tyrone Posted November 13, 2006 Share Posted November 13, 2006 Graham, Will the rev limiter work with a wasted spark ignition, if so I'll have first dibs. I sold my Omex when I got the Megajolt installed and I shouldn't have. Link to comment Share on other sites More sharing options...
Sandy Posted November 13, 2006 Share Posted November 13, 2006 Graham, If the rev counter is the same as my clock, ill have it for the Zetec Sandy Link to comment Share on other sites More sharing options...
graham bass Posted November 13, 2006 Author Share Posted November 13, 2006 Sandy this is a none Caterham item though it is black faced. I'll get it round to Matts before Thursday and you can have a look but it may not be what you're after Tyrone, it's a micro dynamics rl3 smoothcut limiter as seen on page 230 of the Demon Tweeks 2006 cat. I couldn't say whether or not this will work with wasted spark. It's yours until you come back to me? Hows your megajolt performing? Graham Link to comment Share on other sites More sharing options...
Sandy Posted November 13, 2006 Share Posted November 13, 2006 Graham, Ill need it to match so will have to pass Sandy Link to comment Share on other sites More sharing options...
Tyrone Posted November 14, 2006 Share Posted November 14, 2006 Graham, I'll check it out and come back today. In answer to your question, I'm not really sure It's a long story, I'll email you if you need to know. Link to comment Share on other sites More sharing options...
cskip Posted November 14, 2006 Share Posted November 14, 2006 Tyrone - My megajolt has a soft cut limiter included. Can be set in the software. Skip. West Hants Luddite See CSKIP here Link to comment Share on other sites More sharing options...
Tyrone Posted November 14, 2006 Share Posted November 14, 2006 Sorry, Graham slight thread pinch. Clive and I have spoken about this before. The long story is that I am not confident the rev limiting function on the MJ is actually working. Like you, I would have kept my original Omex if I had the benefit of hindsight. Does your Micro Dynamics work with the MJ and wasted spark. None of the info available says if it does or not. Link to comment Share on other sites More sharing options...
DaveMorris Posted November 15, 2006 Share Posted November 15, 2006 Graham, at the risk of having to face the wrath of my darling wife I'll take the set of rods please. Pls blatmail me yr address / contact details and I'll send the necessary. Do you ever meet up with Sandy from Notts. If so then a Gonads supply route is a possibility. Dave X-flow(er) powered Link to comment Share on other sites More sharing options...
graham bass Posted November 16, 2006 Author Share Posted November 16, 2006 Dave YHM. Cheers Graham Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now