tiddy1 Posted March 9, 2002 Share Posted March 9, 2002 I'm just putting my car back together and I have a problem that two wires have come off the rover imobiliser plug, 1 black and 1 red, There are two free pins on the plug but I don't know which wire goes where. I assume they are the power so don't want to fry the unit can any one help. looking at the plug it has two rows of 13 pins the top row has the following wires connected, From the left: pin 4 black, pin 5 yellow, pin 12 black pin 13 brown, On the second row :pin 1, one of the loose wires, pin 4 black, pin 10 one of the loose wires..... I think pin one should be the red and 14 the black But I don't want to risk it Simon Link to comment Share on other sites More sharing options...
tiddy1 Posted March 11, 2002 Author Share Posted March 11, 2002 still struggling, any help out there? Simon Link to comment Share on other sites More sharing options...
Julian Thompson Posted March 11, 2002 Share Posted March 11, 2002 Why not test for voltage first to confirm they are in fact power. I suspect they are not so it will be worth a check. Test them ignition off/on and crank. Surely Caterham can help you.....? Link to comment Share on other sites More sharing options...
Jason Plato Posted March 12, 2002 Share Posted March 12, 2002 Or pop round and take a look at one of the other K's in Bristol ?? CU2Nite Dave Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now