nickh7 Posted October 25, 2006 Share Posted October 25, 2006 Does anybody know the size of the washers I need to fit the Pipe to Tank fittings for Apollo set up Thanks Its Yellow and Black and makes me 😬 Link to comment Share on other sites More sharing options...
mav Posted October 25, 2006 Share Posted October 25, 2006 Was not aware there were washers for the pipe to tank fittings Link to comment Share on other sites More sharing options...
nickh7 Posted October 25, 2006 Author Share Posted October 25, 2006 On the fitting instructions from Cateham its says dowty washers between the adapters (the bit that screws into the tank and then the pipe goes onto that) and the tank I am sure they are 3/4 but I just wanted to check  Thanks Its Yellow and Black and makes me 😬 Link to comment Share on other sites More sharing options...
Mick Day Posted October 27, 2006 Share Posted October 27, 2006 Think Automotive can supply the Dowty washers as they used to put the kits together for CC. They should know what size as well. However if you have the fittings in front of you just measure the diameter & order from here 0208 568 1172 http://www.thinkauto.com/ Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now