roon Posted October 6, 2006 Share Posted October 6, 2006 Any ideas indicator and hazards just stopped working fuses look intact would it be the flasher relay ? Link to comment Share on other sites More sharing options...
Support Team Shaun_E Posted October 6, 2006 Support Team Share Posted October 6, 2006 ...or the hazard switch. Try switching the hazards on and off lots of times. Yellow SL #32 Link to comment Share on other sites More sharing options...
Dickie Normuss Posted October 6, 2006 Share Posted October 6, 2006 Hazzards usually the culprit ric's fun to be found here Seek forgiveness, not permission. Rules are for the interpretation of wise men and the obedience of fools. Link to comment Share on other sites More sharing options...
roon Posted October 6, 2006 Author Share Posted October 6, 2006 will one effect the other ? Link to comment Share on other sites More sharing options...
Graham Perry Posted October 6, 2006 Share Posted October 6, 2006 Yes they do. This happens on a surprising number of cars not just Caterhams. I had two Vauxhalls where this would happen and cycling the Hazards button a few times would cure it. If that doesn't work check the flasher relay in the fusebox is pushed in fully as this works loose occasionally on my seven Link to comment Share on other sites More sharing options...
John Ryan Posted October 6, 2006 Share Posted October 6, 2006 Yes, they do! Normal route to fix is 1) Wiggle hazard switch, if not fixed 2) Change hazard switch, if not fixed 3) Change relay (Assuming not fuse) Link to comment Share on other sites More sharing options...
Normans_Ghost Posted October 6, 2006 Share Posted October 6, 2006 roon, just do it. then you'll know. 😬 Yes, the contacts on the hazard switch corrode and if no contact when off the flashers will not work. Just work the switch on and off as fast as you can for about 20 times. Then see if indicators work. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here You and your seven to The French Blatting Company Limited Link to comment Share on other sites More sharing options...
roon Posted October 6, 2006 Author Share Posted October 6, 2006 Thanks for the advice See you on the road ! Link to comment Share on other sites More sharing options...
Normans_Ghost Posted October 6, 2006 Share Posted October 6, 2006 Oh well that s 3 of all at the same time. I'm the slowest typist! If I haven't already welcomed you to this mad house - welcome. Stop worrying about the indicators anyway. You'll only leave them on all the time! Seeing as your a new lad in this place, if you want a jack, impact wrench or spanner set, look at the Bulk Buy thread on chit chat. I'll have some unpaid for goods going on Monday, email me if you want any. (read thread all the way down and you'll see all the details. The tool boxes are all gone) Email me using the little envelope on the border around this post. Norman Verona, 1989 BDR 220bhp, Reg: B16BDR, Mem No 2166, the full story here You and your seven to The French Blatting Company Limited Link to comment Share on other sites More sharing options...
roon Posted October 6, 2006 Author Share Posted October 6, 2006 most kind !!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now