Good nuts and bolts supplier

[SteveP]

Hopefully not a daft question, but I'm looking for a good mail order / web company who supply a wide variety of stainless / zinc plated nuts, bolts, machine screws, cap screws, etc.

 

Having removed my cycle wings, all of the bolts holding it on sheared due to age and rust and I can't get any replacements down the local DIY stores so am looking for a supplier

 

Relatively low volume, but I want to order a variety of stuff to replace the ageing bolts on the car.

 

Any ideas?

SteveP

 

Screwfix don't have a big enough range.

[Peter T]

Try WWW.namrick.co.uk i have used these on more than one occasion, great range of all threads and sizes, plus quick delivery.

 

C7 PWT

[JampJ]

I found Namrick very expensive,Here's two

I've found to be very reasonable.

Grove Components (Stockport)0161 487 3659.

Ask for Mark.Mention my name.(no i'm not on commision)Just that I've had really good service from him!

Also Mike Peters of SURPLUS SUPPLIES(Notts)01636 636735.Good bloke,good stuff!!

Cheers John Hall.C7 POW.

 

 

[JampJ]

Sorry I forgot to mention,All the stuff I've bought from them has been stainless but they

both do plated steel,s/steel,brass etc.

Cheers John.

[James King]

steve, i am in the process of bolting on my wings too. planning to do it tomorrow. got the bolts from james whiting and nylocs etc. seem to find plenty in B&Q. that aside, do u know how far in the bolt holes are from the edge of the wings? mine were previously glued and there is no reference. i was going for 65mm from the edge any ideas?