Robin C Posted February 26, 2002 Share Posted February 26, 2002 Having been convinced to swop my original 16" Wheels for a set of 13", and opt for 6" on the front and 7" on the rear I'm now confused by "offsets". I know this subject has been discussed at great length, but having just searched, most comments say "make sure you get the right offsets" but don't say what the correct ones are. Apparently the KN wheels supplied through Rob Morris were ET 23 for 6" fronts and ET 18 for 7" rears. Superlite have told me ET 23 for 6" fronts but say "rear space is 94mm giving a 6 negative offset". I have also heard of ET19 being used for 6" fronts and ET25 for 7" rears. Can anyone give me a clear simple answer? Link to comment Share on other sites More sharing options...
Fred Posted February 26, 2002 Share Posted February 26, 2002 I HAVE A SET OF 6 AND 7 ARIVING TOMORROW FROM SUPERLIGHT IF YOU CAN WATE TILL THEN IL TELL YOU IF THEY FIT ON THE DEON REAR AND WIDE TRACK FRONT fredid=blue> smile.gif Link to comment Share on other sites More sharing options...
mike ashurst Posted February 26, 2002 Share Posted February 26, 2002 If you still need info about offsets, look here and select Technical Info. mike Edited by - mike Ashurst on 26 Feb 2002 15:19:37 Edited by - mike ashurst on 26 Feb 2002 15:20:18 Link to comment Share on other sites More sharing options...
Fred Posted February 27, 2002 Share Posted February 27, 2002 robin i received your e mail but when i tried to reply it was sent back to me. i received the wheels today and sent them back fronts don't fit the offset is all wrong personlly i wouldn't touch them i also found the servicebum.gif Edited by - FRED on 27 Feb 2002 19:51:31 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now