Jason Plato Posted August 29, 2006 Share Posted August 29, 2006 need one that works properly this is the little stepper motor that is located on the standard throttle body / inlet . It has the 5 wires and a plug going to it . Does anyone have one after upgrading to throttle bodies ??? many thanks Dave here is C7 TOP South Wales AO Link to comment Share on other sites More sharing options...
rj Posted August 29, 2006 Share Posted August 29, 2006 Will an EU3 version do it, or is it to be used with an Emerald? I've got an EU3... FOC as my bíts use to be... Link to comment Share on other sites More sharing options...
Jason Plato Posted August 29, 2006 Author Share Posted August 29, 2006 *thumbup* *thumbup* *thumbup* *thumbup* *thumbup* *thumbup* *thumbup* *thumbup* pleeeeeeeeeese donation to Ntl do you still have my address from all the other parts 😬 If we are not carefull you will be able to lay claim to my car here is C7 TOP South Wales AO Link to comment Share on other sites More sharing options...
rj Posted August 29, 2006 Share Posted August 29, 2006 Dave, I've still got your address. Don't worry. I won't lay claim on an under-powered over-weight car The dry sump maybe, but not the car.... Edited by - RJ on 30 Aug 2006 12:35:49 Link to comment Share on other sites More sharing options...
rj Posted August 29, 2006 Share Posted August 29, 2006 One thing... The EU3 ICAV has only 4 pins, and I don't think I've saved the connector, but I will have a look for it! Link to comment Share on other sites More sharing options...
Jason Plato Posted August 31, 2006 Author Share Posted August 31, 2006 Thats Ok . I've recheked and mine is 4 too here is C7 TOP South Wales AO Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now