Jump to content
Click here if you are having website access problems ×

Autocom - engine speed related whining noise


Shaun_E

Recommended Posts

  • Support Team

We have recently started to get a whining noise in the headsets of our Autocom. The noise is engine speed related and of course it is intermittent. I have the Autocom mounted in the boot and the wires for the phone and music player run along the tunnel and come out near the handbrake. The headset leads come out over the boot top chassis rail under the tonneau. Moving the phone lead around appears to affect (sometimes eliminating) the noise. I have checked the wires for damage and they are OK. The only change to the setup recently is that we have replaced one of the headsets.

What else should I check and is there a simple way of eliminating the noise?

 

Yellow SL *cool* #32

Link to comment
Share on other sites

I have this on and off. I can confirm that it seems to be guaranteed if your phone/audio cable touches something metallic. Also had it with the usual culprit of a poor earth.

 

Doesn't bother me too much as I never listen to music - just the speedcam/satnav.

 

Project Scope-Creep is live...

 

Alcester Racing 7's Equipe - 🙆🏻

 

Alcester-Racing-Sevens.com


Link to comment
Share on other sites

  • Support Team

Yes it is the pitch that varies with engine speed.

I had wondered about "suppression" as this type of radio interference was typical on old cars with points (my mini and Mk2 Escort spring to mind) - an ignition capacitor was required. In this day of electronic engine management, I assumed that was no longer required.

My alternator is a reconditioned unit and has been banged around a bit recently (have had to remove it a couple of times) so perhaps that is the cause.

Didn't get to do much on this last night - too busy fitting an aero screen *cool*.

 

Yellow SL *cool* #32

Link to comment
Share on other sites

Morning All,

 

If the pitch varies with engine speed and is heard as a whine then it is most likely alternator noise, the suppression will probably be a capacitor which is (electrically) bonded to electrical ground (ie the alternator frame, it's mounts, the engine block and finally the chassis) having a really good earth path is very important to the suppression capacitor working well *thumbup*

 

BTW the chassis being the return path for all of this noisy stuff is why Myles has noted that touching any of the audio cables onto chassis metalwork is a sure fire way of introducing noise into the intercom *smile*

 

Must get back to the day job, currently trying to keep interference out of a headset on a helicopter 😬

 

Cheers,

 

Richard.....................

 

Richard......................

 

Photos here

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...