Jump to content
Click here if you are having website access problems ×

Convertable Exige??


stephen grant

Recommended Posts

 

Couple of days ago. An Exige with the centre section of the roof, between the windscreen and the rear roll bar, removed, and then the roof in place over the engine, as per the standard Exige.

 

When did that happen, eh? I thought the Exige was strictly lid on.

 

stephen

 

Link to comment
Share on other sites

The middle section of the roof is structurally very similar to the removable hard top of an Elise, with the air intake being cosmetic except on the S where it feeds the supercharger (so taking it off would presumably not be that clever)

 

Personally I think if you want to take the roof off you should have an Elise *confused*

 

FireBlade pilot and Regalia Manager

Link to comment
Share on other sites

Well, as the Exige is derivative of the Elise, I guess it was too expensive/useless anyway to develop a one piece windscreen frame/roof assembly. So as the roof remains a separate component why not make it removable anyway as long as it does not compromise rigidity 🤔

 

AFAIAC, if I had an Exihge, I'd rather have a rollcage than a removable roof ...

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...