AMMO Posted February 8, 2002 Share Posted February 8, 2002 I have twelve Carrillo rods which were made for a now abandoned project. They may be adaptable to something else, especially if a custom crank was being made. The dimensions are as follows: Distance between centres 144 mm Small end bore 22 mm (can be re-bushed smaller) Small end width 24 mm (can be reduced) Big end bore 47.139 mm (can be slightly enlarged) Big end width 22 mm 5/16" SPS bolts 491 grms total weight Offers in region of £60.00 each. Cheaper if you buy the lot. AMMO Link to comment Share on other sites More sharing options...
WDervish Posted February 8, 2002 Share Posted February 8, 2002 Ammo, What were the rods for ? - a V12 or something !! I may be interested - you will have mail Chris Link to comment Share on other sites More sharing options...
WDervish Posted February 8, 2002 Share Posted February 8, 2002 Ammo, What were the rods for ? - a V12 or something !! I may be interested - you will have mail Chris Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now