Neil MH Posted June 7, 2006 Share Posted June 7, 2006 1700SS replaced. The following are surplus to requirements. Hopefully Photos for all here or here If neither links work, please blatmail me and I will reply with photos. Any problems with anything, money will be refunded in full. Collection fine (location – Old Coulsdon, near Caterham). If post required, cost will be plus P&P. New Distributor Cap for Lucas/Aldon Distributor Usual Sherpa Cap (need to file fixing slots in normal way) Part no. XD104 and New Rotor Arm Part No. XR79 Both supplied by Redline but not used £7.50 FOR BOTH Side Exit cap for Bosch Cross Flow Distributor £5 Originally Fiat Strada 75/85. New. Magneti Marelli Part No. 713665 Bosch Rotor Arm. For Bosch Cross Flow Distributor. P&P only Part No. 1234 33 2215 Standard Caterham Electric Fan Switch. 98/93. New. £5 Set 4 NGK Spark Plugs BP7EVX Platinum. Max 500 road miles £10 Aldon/Petronix Ignitor. Ref 1843 for Bosch Xflow Distributor £35 Anti Clockwise. Never used (Fitted and immediately removed as Distributor changed). N.B. Based on the instructions there seem to be two minor bits missing: 1) Plastic 0.030 feeler gauge. Southern Carbs seemed to suggest I didn’t need it anyway. 2) 8-32 nut – instructions say “nuts” implying 2 but there is only 1. Apart from that, all the critical bits are there. Aldon may probably be able to advise re bits and exact distributor compatability. Edited by - Neil MH on 9 Jun 2006 22:07:18 Edited by - Neil MH on 14 Jun 2006 13:09:14 Link to comment Share on other sites More sharing options...
adwyer Posted June 7, 2006 Share Posted June 7, 2006 Hi Neil, I am very interested in the sump. Please could you send me some pic's as the link does not appear to be working. My email address is: adrian_s_dwyer@hotmail.com Assuming that it looks in better condition than mine I’ll take it. Cheers, Ad. Link to comment Share on other sites More sharing options...
Neil MH Posted June 7, 2006 Author Share Posted June 7, 2006 Hello Ad, Pictures returned by Blatmail/adddress quoted. Neil Link to comment Share on other sites More sharing options...
adwyer Posted June 7, 2006 Share Posted June 7, 2006 Hi Neil, All looks good to me. Consider the sump sold. I'm not sure when i will be able to collect it, if i transfer you the money, would you be able to hold onto it for a couple of weeks? Hopefully you are not desperate for the space! Ad. Link to comment Share on other sites More sharing options...
Neil MH Posted June 7, 2006 Author Share Posted June 7, 2006 Ad, No problem holding on to it. Happy to wait for the cash till you pick it up. 2 weeks or so is fine. As previously stated, if any problems emerge, I will refund in full. I acquired the sump as a spare and was reassured by the previous owner that it was all ok. I'll email you my mobile no. so that we can sort out arrangements nearer the time. Neil Link to comment Share on other sites More sharing options...
Neil MH Posted June 7, 2006 Author Share Posted June 7, 2006 Coil sold to Phild - YHM. Link to comment Share on other sites More sharing options...
anothercat Posted June 9, 2006 Share Posted June 9, 2006 Neil you have PM The Plugs measure up ok *thumbup* Andrew Link to comment Share on other sites More sharing options...
Neil MH Posted June 9, 2006 Author Share Posted June 9, 2006 New Platinum Plugs sold to Singlemalt (aka Andrew). Thanks. YHM. Neil Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now