Ital axle crownwheel & pinion

[hubcap]

I am looking to change the 3.6:1 CWP in my ATB diffed Ital axle for a 4.1:1 (or possibly 3.9:1). Do you have that 4.1:1 CWP set lying under the bench which never got fitted? Or anybody with a VX classic with the standard 3.9:1 CWP looking for taller gearing who would like to swap.

 

N.B. I dont need the whole diff, just the cwp.

 

Hubcap

[mad max]

i have a 3:9:1 diff in ital axle.Still on car & driving,but always wanted more from top end as i have only 4 gears.

Will the 3:6 diff you've got help me & can we swap if so????

My car is x/flow sprint,bult 1996.

 

big noise

[hubcap]

Hi Noisy

 

Yep we could swap the crown wheel and pinions without too much difficulty. I am looking for lower overall gearing to go racing, whilst the 3.6:1 would effectively raise your gearing by 10%, which helps on the road when cruising etc. Also, I found that running 185/70 021R's again helped the gearing. My car is also a 96 car, with about 10k miles on it, so I dont foresee any problems! - famous last words.

 

You may need to get someone to help you to put the diff back together although it shouldn't be too difficult, I am running a Quaife ATB diff.

 

Let me know if you are interested in a swap.

 

 

Hubcap

[mad max]

Hi there hudcap.This sounds great!!

MIne has done a smidge over 10k.As u know the diff hasn't been taken apart but if its too difficult i can get a machanic friend to bail me out!

I will contact u on email bud...

 

big noise