Nifty Posted May 27, 2006 Share Posted May 27, 2006 I have two steering wheels, both 10". One is Sparco black suede, the other Momo black leather. I want the sudede one for track work but want to be able to use the kleather one when on a long run where I might get caught in rain. Unfortunately they have diametrically opposed drillings for the boss which bu99ers me for swapping between the two easily (I'd need to turn the steering column through 180 degrees between wheels or run with one upside down ) Does anyone have either a Sparco 10" leather they would swap for the Momo 10" leather .. or .. a Momo 10" suede that they would swap for a Sparco 10" suede (black obviously), so I can switch between wheels easily. Both wheels are in good condition and would want to swap for like condition. If anyone can help then I can send pictures. Cheers, Nifty. Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
mav Posted May 27, 2006 Share Posted May 27, 2006 I have the same issue, however, I am having some new holes drilled in my wheel to allow my spare boss to be fitted Link to comment Share on other sites More sharing options...
Nifty Posted May 27, 2006 Author Share Posted May 27, 2006 We (Ernie Panks et moi, T/A Cynghala Engineering Solutions) are considering manufacturing a universal quick reklease mechanism but I thought I'd try the easier route to solve the immediate problem. Keep off the straight and narrow 😬 Folk, I'm pi55ed ❗ ❗ Edited by - Nifty on 28 May 2006 00:29:09 Link to comment Share on other sites More sharing options...
CageyH Posted May 28, 2006 Share Posted May 28, 2006 Nifty, I have a 10" Racetech leather wheel with two holes at the top if that is any use? Link to comment Share on other sites More sharing options...
Nifty Posted May 28, 2006 Author Share Posted May 28, 2006 Kev, I assume this is on a Caterham and therefore is drilled to fit the Caterham boss. If so that would be fine, assuming it's in decent nick Are the drillings countersunk? (The Momo is countersunk) The Momo is as good as new - only bought it a few weeks ago from someone who used it for SVA only .. didn't cotton on to the different bolt hole positions, otherwise I'd use it myself. Do you want to go ahead with a swap? Any chnace you could send me an E-mail address with the address to which you want it posted (I know I have your Bristol address somewhere but can't locate it offhand). Nifty. Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
CageyH Posted May 28, 2006 Share Posted May 28, 2006 Nifty, I would not describe it as perfect. It has a few scuffs on it. The holes are countersunk though. I am not back in the UK until Thursday, so can send some pictures if you like before you decide? Link to comment Share on other sites More sharing options...
Nifty Posted May 28, 2006 Author Share Posted May 28, 2006 Ok mate Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
CageyH Posted June 1, 2006 Share Posted June 1, 2006 Nifty, Just uploading some images now. I'll post a link when finished. Link to comment Share on other sites More sharing options...
CageyH Posted June 1, 2006 Share Posted June 1, 2006 here Link to comment Share on other sites More sharing options...
CageyH Posted June 2, 2006 Share Posted June 2, 2006 Link to comment Share on other sites More sharing options...
CageyH Posted June 5, 2006 Share Posted June 5, 2006 I take it that's a no then Change of plans as an R400 is arriving 🤔 Link to comment Share on other sites More sharing options...
Nifty Posted June 5, 2006 Author Share Posted June 5, 2006 YHM Keep off the straight and narrow 😬 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now