Dave B Posted May 11, 2006 Share Posted May 11, 2006 Currently having steel engine built so have for sale 1700 Xflow, complete with unleaded big valve head, Accralites, cosworth big end bolts, 244 cam, flywheel, standard rear exit exhaust, 40 DCOE's on caterham manifold. Engine is part dismantled as I needed some parts for the new one. I have dyno graphs that show 143 bhp with dry sump and lightened steel flywheel ( this is not with the engine ) oil pressure was always around 3-4 bar hot. May be interested in splitting if enough interest, otherwise £700 for the lot. Hope this sounds reasonable. No doubt someone will show me the error of my ways if not. Link to comment Share on other sites More sharing options...
AndreK Posted May 11, 2006 Share Posted May 11, 2006 Dave B, interested in discussing with you, can you let me have contact details to my e mail please? Link to comment Share on other sites More sharing options...
DaveMorris Posted May 12, 2006 Share Posted May 12, 2006 If you do split it then could be interested in the pistons + other bits and bobs. See what AK is looking for and then let me know what's left, ta, Dave Link to comment Share on other sites More sharing options...
zak Posted May 12, 2006 Share Posted May 12, 2006 Would be interested in the cylinder head. Zak www.zak7.com Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now