Jump to content
Click here if you are having website access problems ×

Xflow block & head looking for a good home.


J A T Richardson

Recommended Posts

I have a 1700 711m xflow bare block with main bearing caps, which needs to have cylinder 1 linered (dropped valve). I also have a bare xflow head which has no 1 cylinder exhaust port well-chewed up (same reason). It would probably be OK once skimmed and hardened insert fitted; it would also need new valve guides. I'm moving and need the space, so it/they is/are free to anyone who will give it/them a good home. Donation to NtL advised, but not mandatory. Recipient collects from South London.

 

Stinky toy driver - and proud of it!

Link to comment
Share on other sites

When do you need to get these shifted ? I could use a spare engine to mod up.

 

NtL no problem for a donation

 

Can easily pick up

 

 

 

 

Get In , Sit Down, Shut Up, Hang On. :-)

 

 

Nev the Rev (As named by Roadrunner Jax)

Link to comment
Share on other sites

Golf Juliet Tango: It's probably NOT suitable for a learning exercise - it IS a bare block - no crankshaft, pistons, con-rods, sump, water or oil pumps, camshaft, followers, pushrods etc., so the main learning curve would be a) where the h*** do I source THAT *confused* and b) HOW MUCH??? 😳

 

Stinky toy driver - and proud of it!

Link to comment
Share on other sites

JAT,

 

Any joy selling your Caterham ? I take it you are upgrading !!!!!! *eek*

 

If you want to get the block and head moved then I can pick up anytime that suits you.

 

 

 

 

 

Get In , Sit Down, Shut Up, Hang On. :-)

 

 

Nev the Rev (As named by Roadrunner Jax)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...