Air filter for Bernard Scouse Airbox

[Racingshoe]

Please can someone tell me which K&N (or other) filter I need to order for my Bernard Scouse airbox? I don't have it to hand, so can't measure the thing....

 

Thanks

 

---

Rik Robarts - C7 DNF the future's bright, the future's no longer orange though.here

[mikes]

I used this one

http://www.knfilters.com/search/product.aspx?Prod=RU-0960

It is offset which helps to give clearance under the nosecone and chassis tubes. I needed to put a sleeve in the end of the airbox to get it to fit - just used a small length of ali tubing.

The one you use does depend on the power requirements though - this was for a 200-ish bhp engine.

I think I may have ordered from DT.

Mike

[oilyhands]

For lower powered (less than 220BHP) I normally retain the existing filter, with later airboxes the airbox entry is sleeved with a short piece of plastic drainpipe (no kidding) and this provides exactly the right size of spout and fits comfortably inside the airbox entry.

 

Oily

[Englishmaninwales]

this was for a 200-ish bhp engine

Hmmm......Class 4 regs? 😳

[mikes]

Thank you for mentioning that Malcolm

Obviously the 200bhp-ish part is using the 'other' map 😬, but at least the air filter is more than capable of dealing with the 190bhp used in Class 4!

Mike

[Englishmaninwales]

😬

(must remember not to confuse ECU switch and video switch at startline, would be a real shocker to use the MOT map up Loton )

[Jason Plato]

I've got one in the garage you can buy if you like rik

 

 

here is my Duratec R .... C7 TOP

Taffia AO

[Racingshoe]

Dave That would save a lot of bother with delivery etc. Thanks.

Let me know when you're back from volcanoland.

 

---

Rik Robarts - C7 DNF the future's bright, the future's no longer orange though.here